Pengering Dehumidifikasi
“Dehumidifier, pengering, dan pengangkut (loader)
MJ3 menyediakan udara kering dengan titik embun rendah yang stabil yaitu -40°C dan pemuat vakum pada satu platform.
Perangkat lantai atas ini mengutamakan perawatan yang mudah.
Karena tidak perlu mengganti bahan penyerap, kinerjanya tetap terjaga seperti saat penggunaan pertama.”
1. Dapat diandalkan
Memastikan kondisi pengeringan yang stabil dengan rotor sarang lebah (honeycomb). Rangkaian pengeringan dan pengangkutan yang independen memungkinkan pengangkutan bahan tanpa memengaruhi kondisi pengeringan.
2. Hemat energi
Struktur hopper ganda meningkatkan isolasi termal dan karenanya, membantu menghemat energi.
3. Ringkas
Gabungan pengering dehumidifikasi dan konveyor menjadi satu unit.
4. Perawatan Mudah
Semua perawatan filter dapat dilakukan dari sisi pengoperasian.
5. Aman
Rangkaian kontrol pemanas dilengkapi dengan SSR (non-contact relay), yang lebih aman dan mengurangi kebutuhan perawatan.
Standard Specification
| Model | Unit | MJ3-10A | MJ3-15A | MJ3-25A | MJ3-50A | MJ3-75A | MJ3-100A | MJ3-150A | MJ3-200A | MJ3-250A | MJ3-300A | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Supply | Voltage | V | AC200/380V, 50Hz, 3 Phase | ||||||||||
| Apparent Power | kVA | 5.4 | 7.1 | 11 | 14 | 21.4 | 28.3 | ||||||
| Breaker Capacity | A | 20/16 | 32/16 | 40/20 | 50/32 | 80/40 | 100/50 | ||||||
| Air Supply | Pressure | MPa | 0.5 | ||||||||||
| Flow Rate | L/h | 10 | 20 | ||||||||||
| Diameter | mm | Ø6 | |||||||||||
| Circulation Cooler (Water Cooling) | Diameter | – | Ø10.5×1/2B Hose nipple | Ø14×1/2B Hose nipple | |||||||||
| Flow Rate | L/min | – | 10 | 20 | |||||||||
| Operating Temperature | ºC | 80~160 | |||||||||||
| Dew-point ※1 | ºC | -40 | |||||||||||
| Hopper Volume ※2 | kg | 10 | 16 | 26 | 54 | 75 | 102 | 150 | 210 | 255 | 300 | ||
| L | 17 | 28 | 44 | 90 | 125 | 170 | 250 | 350 | 425 | 500 | |||
| Drying | Heater | Capacity | kW | 1.0/1.2 | 2.1/2.1 | 4.0/4.0 | 6.0/6.0 | 7.5/9.0 | 12.4/14.9 | ||||
| Blower | Output | kW | 0.22 | 0.38 | 0.9 | 1.5 | 2.2 | 1.5 | |||||
| Conveying Blower | Output | kW | 1.1 | 3.0 | |||||||||
| Regeneration | Blower | Output | kW | 0.047 | 0.081 | 0.13 | |||||||
| Heater | Capacity | kW | 1.0/1.2 | 1.4/1.4 | 2.4/2.4 | 3.0/3.0 | 5.8/6.9 | 9.0/10.7 | |||||
| Outer Dimension | W | mm | 960 | 960 | 960 | 1,158 | 1,158 | 1,285 | 1,285 | 1,461 | 1,710 | 1,710 | |
| D | mm | 564 | 564 | 564 | 639 | 639 | 639 | 639 | 740 | 900 | 900 | ||
| H | mm | 1,721 | 1,811 | 2,061 | 2,065 | 2,365 | 2,221 | 2,611 | 2,600 | 2,450 | 2,600 | ||
| Product Weight | kg | 219 | 224 | 233 | 299 | 309 | 331 | 346 | 500 | 685 | 700 | ||
※1 Ambient Condition: Temperature 30ºC Relative Humidity: 75% (DP+25ºC) Air Inflow: 10%
※2 Volume is that of when using virgin materials with bulk density of 0.6 g/cm3.
Options
• Secondary side two directional conveyance
• 3-Direction material
• Semi-circulation
• Transport dust collecting cyclone
• Dew-point meterage port
• Dew-point sensor
• TSV setting
• Alarm indicator
• Low temperature (MJ3-10A～150A) Temperature 65ºC (unavailable MJ3-200A～300A)
• One-pass
• Weekly timer
• Earth leakage breaker
• Energy save device
• Low level alarm
• Knob setting filter
• Rotation motor alarm
• Drying complete alarm
• Magnet
• Digi pega setting
• Control AC100V